STANDEN T3 - 3-ROW POTATO HARVESTER
- Up to 0.75 ha/hr harvesting capacity
- VariStep adjustable separation point
- Open plan clear-view chassis
- Obstruction free crop path for gentle harvesting
- OMEGA - effective, powerful separation
- Rugged drive-line with minimum wearing parts
- Excellent weight distribution; easy pulling and stability
- Touch Screen user-friendly interface
- RoTo Axle for easy adjustment
- 3.4m transport width; ready for the road in seconds
POWERFUL, HIGH CAPACITY GENTLE HARVESTING FOR HIGH QUALITY POTATOES
STANDEN T3 is a trailed 3-row potato harvester offering up to 60% more output than a 2-row trailed harvester. T3 can harvest 3-rows in different formats; on 72” wheel track (1.8m) beds, lifting one pair of rows between the tractor wheels plus 1-row from the right or left bed. Or at 108" (2.75m) tractor wheel track, 3-rows at 36” (90cm). A 180hp tractor is the recommended minimum.
Part of a complete 3-row system from STANDEN which includes BEDFORMER, POWAVATOR rotary tiller, 3-row UNISTAR and UNIWEB soil-separators, 3-row SP 330 POTATO PLANTER, and a 3-row BASELIER topper with hydraulic sideways movement to suit the T3 harvester. T3 offers outstanding possibilities to reduce harvesting costs; at 30% more expensive to the grower than a 2-row trailed machine, and with a proven output around 60% greater, the figures really stack up; no grower can afford to ignore the potential for this exciting new development.
T3 - RUGGED CHASSIS – POWERFUL HYDRAULIC SYSTEM
T3 is built on a special chassis designed to provide strength, excellent visibility for the driver, and easy access for maintenance and adjustments. The drive-line is simple and rugged, requiring minimal attention, with long life components used to maximise reliability. All hydraulic variable speed drives are featured throughout the harvester, with all speeds adjustable from the driver’s cab mounted CAN-Bus electronic control console.
Powerful hydraulics feature 4 x high capacity load sensing pumps, suction filters protect each of the main pumps separately, and individual pre-filters are fitted before each valve. T3 uses a suitably prepared section of its main chassis as a high capacity hydraulic oil reservoir, providing effective, natural oil cooling, and neat installation without needing a separate oil tank. So efficient is this system, the extra cost and complication of a separate oil cooler has proved unnecessary.
Hydraulic powered wheel drives are standard equipment on T3, the driver can select power assist, constant drive, or power boost functions. Generous flotation wheel equipment is also standard. The offside wheel is rotated underneath the harvester for road transport to achieve a transport width of just 3.4 metres. In the field the wheel is simply rotated to its outer position for maximum stability once the crop is opened. A special wide angle P.T.O shaft allows powered axle operation at headlands. Hydraulic rear axle steering, hydraulic levelling and a hydraulic drawbar are also standard.
FOR FULL INFORMATION ON THE T3 POTATO HARVESTER - PLEASE DOWNLOAD THE .PDF